Facebook posts: Andy Bick

[bgreen]

24 March 2023
https://www.facebook.com/groups/paipobe ... 982965080/

Bick24Mrach23.jpg (73.39 KiB) Viewed 899 times

Ján Janči Póč
Awesome. How did you manage to get hold of the wood from Eden?

Andy Bick

Ján Janči Póč quite a few years ago. I was given a balsa log by Tris Cokes (Tris Surfboards) as it was too short to use for stand up. Balsa grows really quickly and the tree had to be trimmed to stop it going through the roof! The board being surfed in the group image (by Mike Numan) is one of my original hollow Eden balsa Paipos



4 April 2023

https://www.facebook.com/groups/paipobe ... 198415080/

26 May 2023
https://www.facebook.com/groups/paipobe ... 402080080/

Bick26Mayb.jpg (103.7 KiB) Viewed 899 times

Greg Grunke
Beautiful work! What are the dims?

Andy Bick
41” x 17” x not very thick!

Kim Green
like the shape and the wood. Is there a finish on the wood?

Andy Bick
yes it’s locally grown balsa. I’ve had to glass it. Really not my favourite pastime!!

1 June 2023

https://www.facebook.com/groups/paipobe ... 510325080/

10 July 2023
https://www.facebook.com/groups/paipobe ... 834760080/

20 August 2023
https://www.facebook.com/groups/paipobe ... 362155080/

Andy Bick
quite a few years ago. I was given a balsa log by Tris Cokes (Tris Surfboards) as it was too short to use for stand up. Balsa grows really quickly and the tree had to be trimmed to stop it going through the roof! The board being surfed in the group image (by Mike Numan) is one of my original hollow Eden balsa Paipos


22 Octoner 2-23
https://www.facebook.com/groups/paipobe ... 888340080/

[bgreen]

15 February

https://www.facebook.com/groups/paipobe ... 503155080/

Bick15Feb.jpg (79.61 KiB) Viewed 898 times

6 April
https://www.facebook.com/reel/771943391220494/

Bick6April.jpg (39.21 KiB) Viewed 898 times

24 April

https://www.facebook.com/groups/paipobe ... 235025080/

Bick24April.jpg (133.7 KiB) Viewed 898 times

13 May 2024

https://www.facebook.com/groups/paipobe ... 745035080/

BickMay13.jpg (68.67 KiB) Viewed 898 times

26 May 2024
https://www.facebook.com/groups/paipobe ... 101670080/

https://www.instagram.com/ipaulownia

31May

https://www.facebook.com/groups/paipobe ... 961255080/

Bick31Mayb.jpg (11.8 KiB) Viewed 898 times

Bick31May.jpg (81.71 KiB) Viewed 898 times

I’ve been making my own blanks for nearly 20 years. I like the control that comes with that.
The planks (20mm) tend to come with a natural rocker, so I accentuate that by planing the nose and tail to around 12mm and the thickness of the rails is also thinned.
I’ll post some more photos as I build this one.

Nick Worsfold
cool.. are you using biscuits to hold it together ?

Andy Bick
Nick Worsfold no as they could show when planing the rocker or rails. However I do create a thin channel all along the edges to increase adhesion area.

10 June 2024
https://www.facebook.com/reel/430612796403488/

Bick10June.jpg (71.45 KiB) Viewed 898 times

24 June 2024
https://www.facebook.com/reel/1206787870239421/

1 July 2024
https://www.facebook.com/reel/1419318398653716/

Bick1July.jpg (51.78 KiB) Viewed 898 times